Spirit XG200 Manuel d'utilisateur télécharger pdf (Page 15)

XG200 Elliptical

GENERAL MAINTENANCE

 To enter the management mode press the START/STOP key until the console

resets. During the reset, while the LCD segments are all lit, hold down the START/

STOP and + keys until the Time window displays “EN”.

 The LCD segments will be tested and will automatically light sequentially

 The next display shows total usage time in the time window, software version In

Speed window and odometer in distance window.

 Press the DISPLAY key for distance reading setting, use up & down keys to

adjust: 0 = Kilometers, 1 = Miles

 Press the DISPLAY key for “distance per pedal revolution” setting: If the console

is set to MILES, then the number shown will be how many feet are accumulated

for each pedal revolution; the default is 6. If set to metric the number will be

displayed in METERS; the default is 1.83. To adjust the desired settings, use the

+/- keys

 To clear odometer, press + and - at the same time.

 Press DISPLAY to exit.

The elliptical is practically maintenance free. Just keep it clean by wiping down the

unit with a damp cloth after each use. Do not use harsh detergents. Every month

check that all the hardware is securely tightened. Do not use the elliptical if any parts

are loose or broken.

The wheels and aluminum tracks will need to be kept clean to prevent noise and

maintain smoothness. No lubrication should be necessary but if persistent noises

from the wheels develop you can use a small amount of lubricant. Natural lubricants

work well such as vegetable oil or soy based lubrication products like Biokleen from

Ecoviva: http://www.ecoviva.com/html/soy-lube.php

MANGEMENT MODE

1 2 ... 10 11 12 13 14 15 16

Pas de commentaire

Spirit XG200 Manuel d'utilisateur Page 15