Spirit XT485 Manuel d'utilisateur télécharger pdf (Page 5)

XT485 Treadmill

WARNING!

NEVER use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill. As with any appliance with

a large motor, the GFCI will trip often. Route the power cord away from any moving part of the treadmill

including the elevation mechanism and transport wheels.

NEVER remove any cover without rst disconnecting AC power. If voltage varies by ten percent (10%)

or more, the performance of your treadmill may be affected. Such conditions are not covered under your

warranty. If you suspect the voltage is low, contact your local power company or a licensed electrician for

proper testing.

NEVER expose this treadmilll to rain or moisture. This product is NOT designed for use outdoors, near a

pool or spa, or in any other high humidity environment. The operating temperature specication is 40 to

120 degrees Fahrenheit, and humidity is 95% non-condensing (no water drops forming on surfaces).

Circuit Breakers: Some circuit breakers used in homes are not rated for high inrush currents that can

occur when a treadmill is rst turned on or even during use. If your treadmill is tripping the house circuit

breaker (even though it is the proper current rating) but the circuit breaker on the treadmill itself does not

trip, you will need to replace the home breaker with a high inrush type. This is not a warranty defect.

This is a condition we as a manufacture have no ability to control. This part is available through most

electrical supply stores. Examples: Grainger part # 1D237, or available online at www.squared.com

part # QO120HM.

IMPORTANT ELECTRICAL INSTRUCTIONS

GROUNDING INSTRUCTIONS

This product must be grounded. If the treadmilll should malfunction or breakdown, grounding provides a

path of least resistance for electric current, reducing the risk of electric shock. This product is equipped

with a cord having an equipment-grounding plug. The plug must be plugged into an appropriate outlet that

is properly installed and grounded in accordance with all local codes and ordinances.

DANGER - Improper connection of the equipment-grounding conductor can result in a risk of electric

shock. Check with a qualied electrician or serviceman if you are in doubt as to whether the product

is properly grounded. Do not modify the plug provided with the product if it will not t the outlet; have

a proper outlet installed by a qualied electrician.

This product is for use on a nominal 110-volt circuit, and has a grounding plug that looks like the plug

illustrated below. A temporary adapter that looks like the adapter illustrated below may be used to

connect this plug to a 2-pole receptacle as shown below if a properly grounded outlet is not available. The

temporary adapter should be used only until a properly grounded outlet, (shown below) can be installed

by a qualied electrician. The green colored rigid ear-lug, or the like, extending from the adapter, must be

connected to a permanent ground such as a properly grounded outlet box cover. Whenever the adapter is

used, it must be held in place by a metal screw.

1 2 3 4 5 6 7 8 9 10 ... 34 35

Pas de commentaire

Spirit XT485 Manuel d'utilisateur Page 5