Spirit XT185 Manuel d'utilisateur télécharger pdf (Page 23)

XT185 Treadmill

The treadmill is designed so that the tread-belt remains reasonably centered while

in use. It is normal for some belts to drift near one side while in use, depending on

a user’s gait and if they favor one leg. But if during use the belt continues to move

toward one side, adjustments are necessary.

SETTING TREAD-BELT TRACKING

A 6 mm Allen wrench is provided for this

adjustment. Make tracking

adjustments on the left side bolt. Set belt

speed at 3 mph. Be aware that a small

adjustment can make a dramatic

difference which may not be apparent

right away. If the belt is too close to the

left side, then turn the bolt only a 1/4

turn to the right (clockwise) and wait a

few minutes for the belt to adjust itself.

Continue to make 1/4 turns until the belt stabilizes in the center of the running deck.

If the belt is too close to the right side, turn the bolt counter-clockwise. The belt

may require periodic tracking adjustment depending on use and walking/running

characteristics. Some users may affect tracking differently. Expect to make

adjustments as required to center the tread-belt. Adjustments will become less of a

maintenance concern as the belt is used. Proper belt tracking is an owner

responsibility common with all treadmills.

ATTENTION:

DAMAGE TO THE RUNNING BELT RESULTING FROM IMPROPER TRACKING /

TENSION ADJUSTMENTS IS NOT COVERED UNDER THE SPIRIT WARRANTY.

TREADBELT TRACKING ADJUSTMENT

1 2 ... 18 19 20 21 22 23 24 25 26 27

Pas de commentaire

Spirit XT185 Manuel d'utilisateur Page 23